Please join me at my new web home JessieGunderson.com and don’t forget to like the Blog Schmog Facebook community HERE.
We put together a pretty picture card for Valentines day (or any occasion) using scrap art and sewing supplies I had on hand. Each of my kids ages 2-9 got to make their own and the result is still really cute! Of course, I had to do the cutting on Peewee’s.
- 1″ pictures
- scrapbook paper or other colorful paper (for a fun twist, you could have the kids make their own)
- glue stick
- hole punch
You’ll need to print various pictures. Approximately 1″ size. Regular printer paper works fine and is easy for the kids to glue. Cut out the pictures, then have the kids select their background paper. I used a large scrapbook paper deck. You’ll need 18″x 2″ strips of paper so plan accordingly.
Fold the paper into four equal sections. I did this by first folding the right sides together the long way (18″ in half so you can’t see the pattern) then folding back each side so the pattern shows. An accordian with print on one side and blank on the other. Here is Captain Obvious with his folded and ready to go.
Next we glued the pictures to the pretty side of the paper, being careful to avoid the creases. The kids did this themselves and came up with some really fun ways to place their pictures. I didn’t censor them at all except to slide an image over slightly if it overlapped the edge. Scarfunkle is pleased with his card. He chose to use a flag button and red and white ribbon, reminding me that this is a great craft for any occasion.
Punch a hole in one end of your picture card. Darn, I couldn’t find my hole punch so I carefully punched a hole with a dull pencil. Once your hole is punched you will need to select matching ribbon and a button. Cut an approximately 24″ piece of ribbon. You may need a little more if you have trouble (like I did) getting the ribbon to thread through the button and end up fraying the ends. Below is Loud Kiddington’s “matching” ribbon selection and his very own placement of pictures.
Once the pictures are dried enough to handle the card–we glued everything in the process–you can thread the ribbon through the hole, leaving a 1″ tail then thread through your button (on the front side), back through the button and the hole to the back of your card. Fold the card up and wrap the ribbon around twice then wrap the end of the ribbon around the button.
I didn’t have to tie any knots, the ribbon was snug in the button and wrapped nicely but you may have to get creative if you ribbon is silky or narrow and doesn’t want to stay. Peewee inspects her card after I’ve wrapped it up. “Where my boys?” she asks.
Below is the card, wrapped up and ready to go. We’ll have to see how much postage is since I included a button. 🙂 The end result is such a cute card and would sit nicely on someone’s work desk or counter. You could even attach a couple magnets to the back if you know it’s likely to go straight on the frig.